Ipseal is an inorganic protective coating used as a barrier on Ipcote IP9183-R1, IP9253, PL219, Ipthin IP9356.
All of the Ipcote coatings are conductive, sacrificial coatings and inherently porous. Ipseal seals this porosity without detracting from their sacrificial properties. It also creates an electrically non-conductive barrier coat.
The use of Ipseal on top of these products results in a smoother, harder coating which provides a barrier against carbon deposits etc extending the useful life of the base coat and a smoother finish which enhances airflow characteristics and therefore engine efficiency.
IP9184 is for use at temperatures up to 800⁰C (1400⁰F). This material also has capabilities as a coating in its own right, being water based with no VOC’s, this coating has high temperature resistance up to 800⁰C on such metals as nickel. It has shown a 70% reduction in Alpha Case corrosion on titanium at 650⁰C at 3-5 microns.
For repair touch up’s refer to PL270 Khaki
Product Name: High Heat Resistant Sacrificial Aluminium Coating
Product Code: Ipseal H/T Inorganic Seal
Approvals: MSRR 9140 (Previously MSRR9355), IP9184-KH-R1 Green; Rolls Royce Code: 139265, Omat 7/168B – Green, NSN: 8030-99-434-2295, Turbomeca LB714, Alternative to Sermaseal 570
Recommended Thinners: Water
For full details on the correct catalyst, reducer and mixing instructions, please refer to the relevant Technical Data Sheet (TDS) and Application Instruction Sheet