العربية简体中文EnglishFrançaisDeutschItaliano日本語Español
call us on +44(0)121 702 2485
Menu
Zoom images

IP9036-R1
High Heat Resistant Black

, , ,

High temperature one part anti corrosive air dry coating for spray, brush or dip application which will withstand operating temperatures of up to 650ºC. The coating is permanently resistant against temperatures up to 300ºC combined with good solvent and chemical resistance for use on furnaces, chimneys and electrical equipment. May also be used on jet engines, and jet pipes.

, , ,
Description

High temperature one part anti corrosive air dry coating for spray, brush or dip application which will withstand operating temperatures of up to 650ºC. The coating is permanently resistant against temperatures up to 300ºC combined with good solvent and chemical resistance for use on furnaces, chimneys and electrical equipment. May also be used on jet engines, and jet pipes.

Product Name: Pitan Rust Remover -Concentrated

Product Code: IP3120

Approvals: Meets the performance requirements of Mil-C-13370

Recommended Thinners: XYLENE or AD-THIN

For full details on the correct catalyst, reducer and mixing instructions, please refer to the relevant Technical Data Sheet (TDS) and Application Instruction Sheet

Related Products

27497
Stoving Lacquer

High Performance Lacquer with Outstanding Hardness; Adhesion & Chemical Resistance Excellent Exterior Durability Excellent Gloss & Clarity Suitable for Dip; Spray or Roller Coating Electrostatic variant available

IP7985 Range
Anti Corrosion Low Friction Coating

A temperature resistant baking epoxy finish enhanced with fluoropolymer additives to provide a wear resistant low friction coating. The choice of binder resin and additive employed in IP7985 provides excellent adhesion and protection properties for a wide range of ferrous and non-ferrous substrates. Examples of this coating find uses as diverse as Brake Calipers for high performance luxury and sports cars to drill pipe sensors for the Oil and Gas exploration industry.

19335
Air Drying Cellulose Lacquer

19335 is an air drying clear cellulose lacquer designed to provide a rapid drying, glossy protective coating. Ideal for use where rapid handling after coating is a requirement. Suitable for dip and spray. 19335 is used as a decorative finish on products where durability is not the prime factor and/or as a touch up system.

IP7420 Range
2Pk Epoxy Dry Film Lubricant

A 2-part air drying PTFE loaded epoxy finish used to provide an abrasion and wear resistant coating. The dry finish is resistant to abrasion, corrosion and most vehicle operating fluids and chemical attack from brake fluid.

IP9064 Range & B
2 PK Epoxy Finishes

The IP9064 system of coating is a combination of 3 systems, which can be used individually or all 3 for total maximum protection. Each of the 3 individual ‘layers’ are stand alone products in their own right.

48000 Range
Low VOC 2 Pack Polyurethane Finishes

A low VOC (less than 420gm at application) air drying, pigmented polyurethane finishing scheme formulated to provide a flexible and chemically resistant coating. Used with a Low VOC 2 pack epoxy primer, the 48000 Series topcoats provide a tough weather and chemical resistant coating for machinery, plant, vehicle and other applications.

IPSLIP-7470
A/D H/T Chemical Resistant MOS2 DFL

IPSLIP-7470 is a quick drying Molybdenum Di-Sulphide Dry Film Lubricant

53000 Range
2 Pack Low VOC Epoxy Finishes

Low VOC epoxy topcoats, formulated to take account of US and European environmental issues and pressures. The range is not only low VOC, but has been formulated on lead free pigment systems and is aromatic hydrocarbon free.

42000 Range
2 Pack Epoxy Finishes

High performance 2 component finishes with excellent hardness & durability, which provides ultimate chemical protection. Cold or low temperature cure. Suitable for use on a wide variety of substrates including: ferrous and non-ferrous metals, composites and thermoset plastic.

37000 Range
Industrial 2 Pack Acrylic Clear Lacquers

High performance 2 component lacquers with excellent hardness, chemical resistance & flexibility in addition to weathering resistance. High build gloss gives superior adhesion to chrome plated and vacuum metallised plastics.