IP80-63 General Purpose Gloss Clear Varnish
High Performance Air Drying General Purpose Varnish. Meets the requirements of Def Stan 80-63.
High Performance Air Drying General Purpose Varnish. Resistant to Oils and Lubricants. Excellent Exterior Durability. Suitable for Brush
or Spray Application. Ideal for Machinery; Racking Systems; Skips; General Metal Finishing; Equipment Re-finishing; Marine and Exterior and Interior Wood Finishing
Product Name: General Purpose Gloss Clear Varnish
Product Code: IP80-63
Approvals: Meets the requirements of Def Stan 80-63
Recommended Thinners: WHITESPIRIT
For full details on the correct catalyst, reducer and mixing instructions, please refer to the relevant Technical Data Sheet (TDS) and Application Instruction Sheet
Related Products
IP80-27
Ammunition Finishing Paint
Finishing paint for application to primed and/or pre-treated ferrous or non-ferrous materials. Resilient semi-gloss or matt paint available in BS381C colour specifications. Red 537, White, Black and many others. Specific colours will be subject to a MOQ and are made to order. Colours and gloss levels on application.
IP80-68
Paint, Marking, Semi Gloss
Types: Brushing, Brush, Stencilling, Silk Screen Stencilling, Ink Jet Spraying. A Range of marking paints suitable for application to painted or varnished ammunition and ammunition packages and painted or unpainted cases, crates, drums etc.
27521
Clear Akard Conforms To Def 80-92/2 30%
Stoving lacquer for brass, aluminium and steel inside shells in direct contact with explosives. Phenol Formaldehyde lacquer for application to suitable prepared metal substrates. The lacquer provides a corrosion resistant finish against salt water spray. There are three lacquers available; differentiated by the non-volatile content, Clear 22% Clear 30% and Red 30%.
IP80-109
Def 80-109 Air Dry Varnish RD 1177 for Armaments
An air drying oleoresinous varnish for protection of suitably pre-treated surfaces of steel, aluminium, tin plate and zinc alloys other than brass. It is not recommended for application to brass. The varnish is normally tinted blue but clear or other colours are permitted – please specify the colour required when placing an order. Viscosity may be adjusted by addition of Xylene.
IP8-1302
Varnish-Electrical Insulating Brushing Fungicidal Grade
IP8-1302 is a single pack, water resistant, gloss varnish, which is an alternative to 010-1301 / 010-1302, suitable for use in situations where Class A, Class E or Class B insulation is required and where contact with moisture, salt spray and mineral lubricating oils is likely to occur. The varnish is typically used on coils, armature windings and electrical and radio apparatus.
IP80-152
Stoving and Primer Finishes
Defence Standard 80-152 is a stoving finish paint suitable for application to suitably prepared and/or pre-tested metal substrates such as those used in the fabrication of service equipment and instruments.
IP80-9
Paint, Aluminium, Flame Resisting, Air Drying – Brushing or Spraying
This standard specifies requirements for an air-drying, aluminium paint with fire resisting properties suitable for application to the internal surfaces of fighting vehicles.
IP80-54
General Service Gloss Finishing Paint Fuel Resistant – Low VOC
This standard specifies for the requirements for a fuel resistant gloss finishing paint suitable for application by either brush or spray. The air drying paint is suitable for interior and exterior use and may be used with an appropriate priming paint on prepared and / or pre-treated ferrous and wood substrates. The finish is available in a number of colours mainly from BS 381 C – please specify the colour when placing an order.
27520
Clear Akard Def 80-92/2 22%
Stoving lacquer for brass, aluminium and steel inside shells in direct contact with explosives. Phenol Formaldehyde lacquer for application to suitable prepared metal substrates. The lacquer provides a corrosion resistant finish against salt water spray. There are three lacquers available; differentiated by the non-volatile content, Clear 22% Clear 30% and Red 30%.
IP80-25
Lead Free Stoving Ammunition Lacquer
Lead free stoving ammunition lacquer for use on various ammunition components including naval shells missiles etc. For use by Triservice, Army, Navy and RAF. Previously known as CS 3100 B.